I/O control system

网络  输入输出控制系统

计算机



双语例句

  1. Distributional I/ O Data Acquisition System in Supercritical Unit Control System
    分布式远程I/O数据采集系统在超临界机组控制系统的应用
  2. Active I/ O Module and its Application in Real-time Industry Control System
    主动式I/O模块在高速工控场合的应用
  3. The remote I/ O system is a new control system, getting more and more application in the thermal power plant in recent years.
    远程智能I/O系统是一种新型的控制系统,近几年来在火电厂开始得到越来越多的应用。
  4. I/ O controller is a part of the open numerical control system. I/ O controller is constructed based on RCS design mode.
    I/O控制器是开放式数控系统的一部分,考虑到整个数控系统结构层次化和模块化的特点,构造了基于RCS设计方法的I/O控制器。
  5. Through two examples, the problems due to ill considered allocation in I/ O channel allocation of distributed control system ( DCS) were analyzed, and the corresponding solving plans were raised.
    通过2个实例分析了DCS系统I/O通道分配上考虑不周导致的一些问题,并提出了相应的解决方案。
  6. The Research and Discussion on Reducing I/ O Point of PLC Control System
    减少PLC控制系统I/O点的研究与探讨
  7. Software for CNC System is divided into man-machine interface, preprogram, data processing, sampling and interpolation, servo control, I/ O control, communication module between host and the secondary system etc.
    数控系统软件可划分为人机交互、预编译、数据处理、采样插补、伺服控制、I/O控制和主、从机通信模块。
  8. The paper also considers selection of components, watchdog circuits, data safety, redundancy design, checkout of I/ O, control on power up and system fault.
    文中还从器件参数选用、看门狗电路、数据存储安全、IO冗余设计及校验、上电输出控制、装置故障信号等多方面作了充分的考虑。
  9. A Solution of Remote I/ O Control for WAO System
    湿式空气氧化系统的远程I/O控制方案
  10. The solution of the dual I/ O PLC control system of hydropower station
    水电站PLC系统双I/O冗余输入输出解决方案
  11. The programs in PMAC main realize real time control, variable initializing and decoding of the machining code. The logic and I/ O control of the system are done by PLC programs which are also in PMAC.
    下位机PMAC中的程序主要是实现系统的实时控制,变量初始化,代码解释等功能的程序和进行逻辑控制、I/O控制的PLC程序。
  12. Design of I/ O Interface Control System Based on the GPIB Bus Technology
    基于GPIB总线技术的I/O接口控制系统设计
  13. This article introduces two methods of using VB to visit I/ O ports of hardware in computer measurement and control system, and provides an example of using VB to develop data collection soft.
    本文详细介绍了VB在计算机测控系统中对硬件I/O端口访问的两种方法,并给出了用VB开发数据采集系统的实例。
  14. A I/ O Subsystem on the Two-level Robot Control System
    一个二级机器人控制系统的I/O子系统实现
  15. Choice of type, I/ O module, Programmable controller and outer device, and control system structure and way is introduced in Programmable control system;
    介绍PLC控制系统设计中,型号选择、I/O模块选择、编程器与外部设备的选择以及控制系统的结构与控制方式的选择;
  16. According to the desire to I/ O that of universal module in open numerical control system, The author designed the digital I/ O circuit by High density in system programmable logic device.
    根据开放式数控系统中通用伺服控制模板对I/O的要求,由高密度在系统可编程逻辑器件设计了单片数字I/O电路。
  17. The paper presents the implementation idea of combinatorial logical circuit based on CPLD in VHDL, and offers a specific application named decoding and I/ O control of embedded teaching system to explain how to carry out the idea, including part of programming code.
    本文介绍了基于CPLD组合逻辑电路的VHDL设计思想,并结合嵌入式教学系统的译码和I/O控制电路的具体应用,做了较为详细的例证,其中包含部分代码。
  18. Four sub-systems: interactive parameter input system. train simulation system. graphic system and I/ O control system are discussed in detail.
    文中介绍了它的硬件环境和软件设计,以及交互式参数输入系统、列车仿真系统、图形系统和I/O控制系统的功能和工作原理,最后阐述了列车运行仿真过程和仿真结果。
  19. This paper discusses the judgement and process of program derailment, and presents fault tolerance methods in random access memory, I/ O canal and data in computer real-time control system.
    本文提出了在计算机实时控制系统中,程序飞出的判断及其处理方法;提出了随机存贮器的容错方法,I/O通道的容错方法以及数据的容错方法。
  20. Multithread I/ O Control of Media Stream of Uncompressed Digital Playing System
    无压缩数字播放系统中媒体流的多线程存取控制策略
  21. Design and Implementation of the Digital I/ O Control Based on Display Measurement System
    显示测试系统数字I/O口控制的设计与实现
  22. Intellectualized Distributed I/ O Interface in Emulation Control system
    仿真控制中的智能化分布输入/输出接口
  23. The article describes the central thought and the I/ O controller's functions and composing in numerical control system. It explains the design and realizing courses of an I/ O controller based on RCS method in detail.
    文章简述了RCS方法的主要思想及数控系统中I/O控制器的主要功能和组成,详细阐述一个基于RCS方法的I/O控制器的设计和实现过程。
  24. The Application of PLC Remote I/ O Control in the Coal Transfer System of Power Station
    PLC远程I/O控制在电厂输煤系统中的应用
  25. The establishment of the wind turbine simulation platform, similar to the real operating environment, operational status, I/ O interfaces and control system, has an important and realistic significance.
    建立与风力发电机组运行环境、运行特性、I/O接口、控制系统相似的仿真实验平台具有重要而现实的意义。
  26. On the base of analyzing the I/ O features of the controller and two control system schemes, this paper presents the design of a software platform to generate control program automatically and the realization of communication between controllers based on MODBUS protocol.
    在分析该企业使用的控制器输入输出特点和控制系统方案的基础上,设计一套可以无需手工编写代码而自动生成控制程序的集成软件平台,并实现了控制器之间基于MODBUS协议的通讯。
  27. The article is based on designing the hardware compositions of carbon-dioxide arc welding of the rear axle of car the proper software which is made by allocating the input and output signal and I/ O address makes the PLC control system work with stability and normal.
    在设计了汽车车桥CO2气体保护焊焊接生产线硬件组成的基础上,通过对输入信号和输出信号分配和I/O地址的分配,编写合适的控制软件,使PLC控制系统能够稳定、正常工作。
  28. The CPLD chip sent the input signals that have been detected to the ARM after pretreatment and received the control signals from the ARM. In this way, the I/ O ports extension of the main control system and the signal preprocessing have been realized.
    协处理器CPLD将检测到的输入信号预处理之后发送给ARM,并接收ARM传输的输出控制信号,实现了主控系统I/0口的扩展和对信号的预处理。
  29. PROFIBUS-DP is one part of PROFIBUS, designed for the communication between automatic control system and device-level distributed I/ O, for high-speed data transfer between distributed control system equipments.
    PROFIBUS-DP是PROFIBUS总线标准的一部分,专为自动控制系统与设备级分散I/0之间的通信而设计的,用于分布式控制系统设备间的高速数据传输。